CELLCONAS BF600 is a highly active, protein based lightweight cellular concrete foaming agent. The production process, which is specially developed for foam stabilization, guarantees optimum foam formation properties and foam stability as well as the unusual fixed properties of the product. CELLCONAS BF600 is particularly recommended for production processes that require long-term foam stability.

CELLCONAS BF600 is concentrated with specific active ingredients developed for the building material industry. It is diluted with water and processed with compressed air and foam generator to produce very fine and stable high quality foam. Dilution of the foam and generator settings are important at this stage.

CELLCONAS BF600 is successfully based on manifold forces during mixing, pumping, casting and hydration. Foam does not cause any chemical reaction in concrete. It acts only as a wrapping material in which air is held. It does not produce toxic fumes or emissions throughout its life. The shelf life of CELLCONAS agents is guaranteed for 12 months before integration into concrete mixtures.



  • Water soluble and miscible.
  • Biodegradable.
  • Can be used without fear of toxicity.
  • The dosage requirement is relatively low, which reduces costs.
  • Produces stable and uniform air bubbles.
  • Highly active, foam forming proteins provide long-term foam stability.
  • Anti bacterial
  • Effective against mold growth
  • Self levelling


  • After subway tunnel shafts opened for excavation and ventilation, applied backfill concrete is formed using by CELLCONAS BF600. Especially if the tunnel passes under or near the shaft, it should be preferred.
  • In landscaping, light concrete formed using by CELLCONAS BF600 is applied in areas where water insulation cannot be carried and the soil cannot bear the load to be placed on the ground. It is produced as an alternative filling material which can be applied light and fast and can be used instead of XPS / Styrofoam.


  • Recommended foam weight is minimum 60 kg/m3.
  • Recommended sand, 0.1-0.2mm. washed sand
  • The water used in foam formation can be used with any type of water. Well water or fresh water is recommended.
  • Recommended Cement is used with all kinds of cement. Portland 42.5 recommended.
  • Bubble size Consisting of: approx.: 0.01 - 0.02 mm (10 - 20 microns)

Promotion , Have You Examined Our Catalog?

Meet FOAMCRETE, the world’s best lightweight foam concrete! 


The recommended storage temperature range from -5°C to +50°C. Ensure containers are not directly exposed to sunlight & heat for a long period. It is unaffected by freeze/thaw cycles. Shelf life of at 12 months can be expected if it is stored properly in original container


CELLCONAS BF600 is readily biodegradable and demonstrates low toxicity to aquatic organisms. It can be successfully treated in biological waste water treatment systems.


AppearanceDark Brown Clear Liquid
Specific Gravity1.09 ± 0.01 gr/cm3
pH6.00 – 8.006.00 – 8.00
Viscosity< 20 cps
Sedimentation v/v%<0.1
Freezing Point≤ -5.00 °C≤ -5.00 °C


Plastic DrumPlastic BarrelIBC Bulk
Capacity20 kg.30 kg.200 kg.1000 kg.
Empty Weight ( kg )
Filled Weight ( kg )2131.52091060
Dimensions (mm)305 x 295 x 333380 x 300 x 360585 D x 945 H1200 L x 1000 W x 1165 H

Palletizing of pails and drums is available upon request.


Proposal form